User's Manual

cleaning it. If you remove the earhook too often, it may become

loose.

Clean the coil cable with a dry cloth. •

Clean sound processor covers and the Snugﬁ t with a soft dry cloth.•

If audio accessories are dirty, clean them with a soft dry cloth. You •

can blow on the processor accessory socket to remove any dust.

Replacing microphone protectors

A dirty or blocked microphone protector results in the gradual

deterioration of sound quality.

Replace the microphone protectors if you notice degradation in the

sound quality, or if the protectors look dirty. It is generally a good idea

to replace microphone protectors approximately once a month. Replace

both microphone protectors at the same time.

Cleaning the battery charger

If you notice any dust or dirt in the battery charger sockets, clean them

as follows:

If the battery charger is plugged into the power adaptor, unplug it.1.

Remove any battery modules placed in the charger.2.

Hold the battery charger upside down and tap on it to remove 3.

any dirt from the battery charger sockets. Gently blowing on the

battery charger sockets may also help remove dirt.

Wipe the battery charger sockets with a soft dry cloth.4.

If the battery charger gets splashed with liquid, shake out the liquid and

dry it for approximately 24 hours. Do not use the battery charger until it

is dry.

For a more even wear of battery charger sockets, cycle batteries in

different sockets when recharging batteries.

Storing your processor when not in use

Moisture or humidity may cause your processor to cut-out or stop

working.

Store your processor overnight or when you are not using it, in the

Caring for your processor

195992 Iss3 CP810 user guide 01.indd 58 13/05/2009 4:25:38 PM