User's Manual

The Zephyr Dry & Store helps remove moisture from your processor.

Before using this dry aid kit, read the manufacturer’s instructions for

use. It is recommended to only use the Zephyr Dry & Store supplied by

Cochlear.

Figure 19: Zephyr Dry & Store

If your processor gets exposed to salt water or chemicals, wipe it with a

damp cloth before placing it in the Zephyr Dry & Store.

Avoid getting sand or dirt into any part of the system. If this happens:

Shake out the sand or dirt as much as possible.1.

Wipe your processor with a damp cloth. 2.

Place the processor in the dry aid kit. 3.

Once your processor is dry, check if it is working. If your processor is

not working, return it to your clinician for service. Cochlear cannot

guarantee that they will be able to repair any water-damaged part.

Cleaning your processor parts

Regular cleaning of your processor parts prevents dirt from building up

and degrading the sound quality. You can clean your processor parts as

follows:

Regularly check the contacts between the processing unit and the •

battery module to ensure they are clean. If the contacts are dirty,

you can gently tap or blow on them to remove any dirt.

If the battery module is dirty, wipe it with a soft dry cloth. Keep •

the battery module dry and free from moisture.

If the earhook is dirty, clean it with a soft dry cloth. You do not •

need to remove the earhook from the processing unit when

Caring for your processor

195992 Iss3 CP810 user guide 01.indd 57 13/05/2009 4:25:36 PM