User's Guide

38 NUCLEUS 7 SOUND PROCESSOR USER GUIDE

Regular care

CAUTIONS

• Do not use cleaning agents or alcohol to clean your

processor.

• Turn your processor off before cleaning or performing

maintenance.

Every day

• Check all parts and any accessories you use

(e.g. Snugﬁt) for dirt or moisture. Wipe the processor,

coil, cable, earhook and accessories with a soft dry

cloth. (You can leave accessories on the processor while

cleaning.)

• Keep your processor free from moisture by drying it

every night in your dry aid kit.

• Remove the battery module and make sure all the

contacts are clean. Carefully tap or blow on them to

remove any dirt. Wipe the contacts with a soft dry

cloth.

• Keep accessories clean. Blow on connectors to remove

any dust and clean accessories with a soft dry cloth.

• Check the microphone protectors for signs of dirt or

grime and replace if needed. See Change microphone

cover on page 44.

DRAFT ONLY FOR CLINICAL TESTING

592753_1-06_EN_CP1000_UG_EMEA.indd 38 14/06/2016 1:23:50 PM