Portable MP3/CD Player with AM/FM Radio MP-CD455 Instruction Manual
SAFETY INSTRUCTIONS CAUTION For Customer Use: Enter below the serial number that is located on the bottom of the unit. Retain this information for future reference. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK) OF THE UNIT. REFER SERVICING ONLY TO QUALIFIED SERVICE PERSONNEL. Model No. MP-CD455 Serial No.
SAFETY INSTRUCTIONS (Cont.) 1. Read these instructions carefully. Keep these instructions for future reference. 2. Heed all warnings and follow all instructions. 3. Do not expose to water or moisture. 4. Clean only with a dry cloth. 5. Keep objects away from ventilation openings. Do not block ventilation openings at any time. 6. Do not install near any apparatus that produces heat such as stoves, radiators, amplifiers, etc. 7. Do not force the power plug into a wall outlet.
LOCATION OF CONTROLS Front View 02 03 01 04 Top View 05 15 06 07 14 08 13 20 12 09 21 11 10 Rear View 16 19 Voltage Selector Switch (110/220 V) (bottom) 18 - - 17
LOCATION OF CONTROLS (Cont.) 1. Speaker 2. LCD Display 3. FM Stereo Indicator 4. Telescopic FM Antenna 5. Radio Band Switch (FM Stereo, FM, AM) 6. Next/Fast Forward Button 7. Play/Pause Button 8. Previous/Fast Reverse Button 9. Stop Button 10. Open/Close CD Door 11. Repeat Mode Button (REPEAT) 12. Program Button 13. Headphone Jack 14. Function Switch (MP3/CD, Off, Radio) 15. Handle 16. Volume Dial 17. AC Power Jack 18. Battery Compartment 19. Tuning Dial 20.
PACKAGE CONTENTS Carefully unpack the main unit from its carton (do not attempt to connect anything at this stage). The carton should contain the following items: 1. Instruction Manual . Main Unit with AC Plug If any of these items are missing, please consult your local retailer. Please retain the original packaging for future transport of this unit. CARE & MAINTENANCE Handling CDs Hold a CD by its edges. Avoid touching the recorded side of the disc.
GENERAL OPERATION Power Sources AC Power Before connecting the unit to an AC outlet, make sure that the operating voltage of the unit has been properly set to match the voltage of your local power supply (110V or 220V). The voltage switch can be found on the bottom of the unit. When you have confirmed that the proper voltage has been set, use the supplied AC power cord to connect the unit to an AC outlet.
MP3/CD OPERATION Set the Function switch to the MP3/CD position to listen to MP3-CDs or regular audio CDs. What is an MP3-CD? MP3-CDs are CDs that contain MP3 music files. Approximately 200 files can fit on one 700MB CD — in comparison, a regular audio CD can fit approximately 20 tracks. Each MP3 file on the MP3-CD is recognized by the player as an audio track. The buttons “10+” and “10-” make it easier to find and play a MP3-CD track.
MP3/CD OPERATION Program Mode You can set the unit to play tracks on the CD in a predetermined order. To create a programmed track list: 1. Press . Press PROG once. The LCD will display “P01”. to make sure that the CD has stopped playing. . Use the FWD, PREV, “10+”, and “10-” buttons to select a track to program (the LCD display will show the track number) and then press PROG to add the track to the program list. The LCD will now display the next Program track number (eg, “P02”). 4.
SPECIFICATIONS Power Supply AC: 110/220V 50/60Hz Dual Voltage DC: 12V (8 x C Batteries) (Not Included) Frequency Range AM: 530 - 1710 kHz FM: 88 - 108 MHz Power Consumption 14W Output Power 1.2W RMS x 2 channels CD Player Optical Pickup 3-beam, semi-conductor laser Frequency Response 100Hz - 16 kHz General Headphones: 3.5mm stereo plug, 8 - 32 Ohms Product Size: 10.1” x 4.6” x 7.
