User's Manual

- 10 -
MP3/CD/USB OPERATION
Program Mode
You can set the unit to play tracks on the CD or USB
device in a predetermined order. To create a pro-
grammed track list:
Press to make sure that playback has
stopped.
Press PROG once. The LCD Display will show
“P01”.
Use the , , FOLDER UP, or FOLDER
DN buttons to select a track to program (the
LCD Display will show the track number)
and then press PROG to add the track to the
program list. The LCD will now show the next
Program track number (eg, “P02”).
Repeat Step 3 until you have nished adding
tracks to the program list.
Press to start Program mode playback. To cancel Program mode playback, press
twice.
1.
2.
3.
4.
5.
The program list can store a
maximum of 20 tracks.
The program list will be lost if
STOP is pressed twice, the CD
door is opened, or the unit is
turned off.
If is pressed before PROG
during track selection, the track
will not be added to the program
list. The player will start playing
the CD/USB device from the rst
selected track instead.
•
•
•
Notes