Specifications

Section
3
page
53
Home Audio/Theater
3
MCMelectronics.com
Product Questions Email: [e-mail] Email: [e-mail]
Follow us on:
High Power IR Blaster
Designed for installation
into equipment rack, this
unit is intended to provide
sufficient output to control
all components. The unique
3" wand features two
high output IR emitters
“flooding” the rack with the
remote signal. The wand can be adjusted above or below
a rack of components to suit specific situation. Attached
8' lead is terminated with a two-conductor 3.5mm plug.
Order # Mfr. # (1-3) (4-11) (12-up)
50-8360 IRE-5.0 $29.99 $28.03 $25.08
Standard IR Emitters
Compact sensors attach via
included double sided adhesive,
and may be mounted near
equipment to be controlled.
Multiple configurations are
available to suit a variety of
applications. Dual emitter units
allow placement in front of two pieces of equipment,
from only one plug connection. Units with visible LEDs
provide visible feedback of presence of IR signal. Each
includes an attached 8' lead, terminated with a two-
conductor 3.5mm plug.
Order # Mfr. # Description (1-3) (4-11) (12-up)
50-8356 IRE-1.0 Single emitter $11.99 $10.89 $10.09
50-8357 IRE-2.0 Dual emitter 21.99 19.95 17.95
50-8358 IRE-3.0 Single emitter 11.99 10.89 10.09
w/visible LED
50-8359 IRE-4.0 Dual emitter 19.99 18.95 16.95
w/visible LED
Micro Mini IR Emitter
Extremely compact IR
sensor is only slightly
larger diameter than its
connection cable, and can
be placed inside the actual component, near the IR sensor.
This emitter will “blast” the entire chassis, ensuring the
equipment IR sensor will receive the signal. It is a great
alternative to “untidy” front panel emitters. Includes 8'
lead terminated with two-conductor 3.5mm plug.
Order # Mfr. # (1-3) (4-11) (12-up)
50-8355 IRE-0.5 $23.49 $21.95 $19.79
SmartPath
Connecting Cables
Use to adapt
components for use with
other equipment, or to
extend existing leads.
Sets include: •PTP-1.0:
Set of six, 12"
2-conductor cables, male
to male 3.5mm plugs •PTP-8: Set of six, 8'
2-conductor cables, male to male 3.5mm plugs
•PTJ-40: 40' 2-conductor cable, male to female
3.5mm plugs •QIX-1.0: 15' 4-conductor cable, male
to female 3.5mm plugs •SAC-1.0: Diode protected “Y”
cable, single female to two male 3.5mm plugs, allows
connection of one emitter to two sources •PTS-3: Set of
six, 36" 2-conductor cables, male 3.5mm plug to stripped
leads •STS-4: Set of six, 48" 2-conductor cables, barrel
type power plug to stripped leads.
Order # Mfr. # (1-3 sets) (4-11 sets) (12 sets -up)
50-8372 PTP-1.0 $20.00 $19.00 $17.00
50-8373 PTP-8 32.99 30.45 27.20
50-8375 QIX-1.0 8.50 8.08 7.23
50-8377 PTS-3 12.49 11.40 10.20
In–Wall A/B Speaker Switch
Simple pushbutton A/B operation allows selection of two speaker pairs from a single amplifier,
or a single pair of speakers to select between two separate sources. Ideal when a pair of in–wall or
ceiling speakers is needed for a local stereo or home theater system, and whole house audio. Mounts
in standard single gang electrical boxes or low voltage brackets, units include decora cover plate
and all hardware.
Order # Description (1–3 kits) (4–11 kits)
50-8440 White $34.99 $33.20
50-8441 Bone 34.99 33.20
50-8442 Almond 34.99 33.20
Input Source
Switch Boxes
Tabletop control box
allows selection of multiple input sources. Ideal
when connecting several audio devices, such as
CD players, VCRs, laser disk players and satellite
receivers to home stereo equipment. Models available to
select from three, four or five sources. Internal PC board
design provides quiet, reliable operation. All connections
are all RCA type female. Metal case has non-skid rubber
feet and stays securely fixed in place. Dimensions:
6.9" (W) x 2.2" (H) x 3.9" (D).
Order # Positions (1-5) (6-9) (10-up)
50-6170 Three $14.49 $13.03 $10.98
50-6175 Four 15.49 14.45 11.92
50-6180 Five 16.99 15.27 12.10
Back
Top
Three-Way Audio/Video Switch Box
Tabletop control box allows selection of multiple A/V
sources. Ideal when connecting several devices, such as
CCTV cameras, camcorders, VCRs, laser disk players
and satellite receivers to a single video monitor or
VCR. Accommodates video and left and right audio,
all connections are all RCA type female. Metal case
has non-skid rubber feet and stays securely in place.
Dimensions: 6.9" (W) x 2.2" (H) x 3.9" (D). Sloped
front, black color.
Order # (1-5) (6-9) (10-up)
50-6195 $19.99 $18.95 $15.09
A/B Input Source Switch Box
Compact control box allows selection
of two input sources into a single
auxiliary or tape input. Single push
button switch selects source “A” or
“B”. Ideal when connecting audio
devices such as CD players, VCRs,
laser disk players and satellite
receivers to home stereo equipment.
Output connection is made via
attached 5' lead, terminated with male
RCA type connectors, color coded red
and white. Input connections are RCA
type female. Rugged metal enclosure
is black in color, dimensions: 3" (W) x
1" (H) x 3" (D) including switch
and connections.
Order # (1-5) (6-9) (10-up)
50-6220 $8.99 $8.19 $7.49
Keystone Mount
3.5mm Connector
This keystone insert
features a standard
3.5mm three-
conductor female jack
which may be used in
two or three conductor
applications. It is ideal any time a 3.5mm connector is
needed at a wall plate. Rear mounted IDC connector
allows simple, fast connection to unterminated Cat 5
cable, or any 22~24AWG solid or stranded, UTP or
shielded wire. Maximum voltage: 24VAC/DC, 1A.
Applications: •Remote location of headphone jacks
•Remote microphone connections •Remote input from PC
sound card, MP3 player or iPod™ •IR repeater connection
•Remote triggering of A/V components •Low voltage DC
connection •Sold individually
Order # MSRP (1-3) (4-up)
50-7753 $12.95 $6.99 $5.95
Keystone Mount
DC Power
Connection
This keystone insert
features a standard
barrel jack which
accepts connection
from most AC
adapters. It is essential when low voltage must be inserted
into a Cat 5 pair for remote distribution. It is ideal for
remote powering of small LCD monitors, video cameras,
IR repeater systems and similar items. Rear mounted IDC
connector allows simple, fast connection to unterminated
22~24AWG solid or stranded wire. Maximum voltage:
24VAC/DC, 1A. Barrel size: 2.1mm I.D., 5.5mm O.D.
•Sold individually
Order # MSRP (1-3) (4-up)
50-7752 $11.95 $6.99 $5.95
SmartPath IR System
Power Supplies
Supplies plug directly into
SpeakerCraft terminator
models AT-1.0 or PT-1.0 to
provide power to the entire IR
repeater system. Both high
quality units are regulated at
12VDC, at the current rating
shown below. The correct
power supply, with sufficient
current output, must be
selected for the system in
place. To calculate current
requirements, simply add the
current draw of each device to
determine the total current needed. Current draw of
SpeakerCraft devices are as follows: •IR emitters: 15mA
•IR receivers: 6mA •IR blasters: 150mA •Terminator units
AT-1.0 and PT-1.0 add no additional current draw
Order # Mfr. # Current (1-3) (4-11)
50-8361 PS-2.0 1200mA $55.49 $52.25
50-8362 PS-1.0 200mA 13.49 12.35