Instruction manual

Coby Electronics Corp. [5] www.cobyusa.com
Getting Started
To get started using your digital photo keychain:
Install the Photo Viewer Software onto your computer
from the Installation CD.
Connect the Key Chain to your computer using the sup-
plied USB cable.
Use the Photo Viewer Software to transfer photos to the
Key Chain.
Disconnect the Key Chain from your computer.
Charging the Key Chain
The Key Chain comes with an integrated lithium-ion bat-
tery. The battery can be charged by connecting it to the
USB port of a powered-on computer.
When connected to a USB hub, the hub must be self-
powered to charge the Key Chain’s battery.
The Key Chain should be charged a minimum of
four hours before initial use.
A new or exhausted battery should be charged
fully before its initial use to ensure optimum
lifetime performance.
1.
2.
3.
4.
●
Please observe the following when using
this item:
Do not disassemble, modify, crush, or puncture
the unit in any way. Any excessive impact may
cause the unit to malfunction.
Do not expose to high temperatures above 140°F
(60°C).
Do not incinerate; dispose of properly.
Store between -4°F and 122°F (-20°C and 50°C).
Keep away from children.