Instruction manual

Page 6 Coby Electronics Corporation
English
www.cobyusa.com Page 7www.cobyusa.com Page 7
Getting Started
Powering your speakerphone
Charging
Please charge the battery fully (approx.  hrs) before using
your CVM Speakerphone. To charge your speaker-
phone, plug one end of the supplied cord into the phone’s
USB socket and the other end into a power source.
The LED charge indicator will be delayed for a
few minutes if the speakerphone has not been
used for a long time or if the battery is completely
drained.
The red ashing LED indicates that your speak-
erphone battery is low. When this occurs, please
charge your speakerphone as soon as possible.
Continuing to use the speakerphone when the
battery is low may shorten the life of the battery
and damage the phone’s ability to fully charge.
When plugged into the charger, the speaker-
phone’s red LED indicator will light to indicate
charging in progress. This indicator will turn o
when the phone is fully charged.
Power On/O
Power On: 
Press and hold the MFB key for  seconds until you
hear a short beep. The blue LED will ash  times
and the phone will power on. If you have already
paired your speakerphone with a compatible cellular
phone, it will reconnect to that phone automatically.
Otherwise, see instructions for pairing below.