TFT LCD Widescreen Television Instruction Manual TFTV1925/2225 Please read this manual carefully before connection and use
Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric to persons.
Precautions FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: •• This device may not cause harmful interference, and •• This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules.
Important Safety Instructions 111 222 333 444 555 Read Instructions: All the safety and operating instructions should be read before the product is operated. Retain Instructions: The safety and operating instructions should be retained for future reference. Heed Warnings: All warnings on the product and in the operating instructions should be adhered to. Follow Instructions: All operating and usage instructions should be followed. Cleaning: Unplug this product from the wall outlet before cleaning.
Important Safety Instructions 2222 Damage Requiring Service: Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) when the power-supply or plug is damaged; b) if liquid has been spilled or if objects have fallen into the product; c) if the product has been exposed to rain or water; d) if the product does not operate normally by following the operating instructions.
Table of Contents Table Of Contents Precautions Important Safety Instructions Main Feature-----------------------------------------------------------------------------------------------------------------------------1 Package Contents-----------------------------------------------------------------------------------------------------------------2 Unit View---------------------------------------------------------------------------------------------------------------------3 Remote Control ---------------------
Main Features This product incorporates the LCD display and the TV receiver in one system. Multiple Mode TV AV S-VIDEO COMPONENT HDMI VGA High Quality Property High Resolution Adopt an MPEG2 decoding format to achieve horizontal resolution more than 500 lines. Superior sound Built-in Dolby Digital decoder to output high quality sound effects.
Package Contents Please make sure the following items are included with your LCD TV/monitor. If any item is missing, contact your dealer. a. b. c.
Unit View 1 4 5 6 7 8 3 2 1. TFT SCREEN Present high resolution pictures 2. POWER INDICATOR Lights blue in the standby/power-on mode, 9 3. REMOTE SENSOR Sense the remote control signal. 4. VOL+/ Adjust sound output level. 5. CH+/- 10 Press to skip channels. 6. MENU Display the system setup menu. 11 7.
Remote Control Remote Control Drawing 12 1 1. POWER Press to turn on/off the unit. 2. Numeric Keypad 2 Press to input data. 3. "-" Button 13 Used with number buttons to access TV programs. 3 14 4. VOLUME +/ Press to adjust sound level. 15 4 5. CH/LIST Press to display the program list. 16 6. FORMAT 5 17 Press to set the screen format. 6 18 7. SLEEP Press to access the sleep timer. 8. CC 19 Set the closed caption mode. 7 20 9. EPG 8 9 21 Access the Electronic Program Guide.
Remote Control Remote Control Preparation •• Remove the battery compartment cover located on the rear of the remote control. Insert 2 x “AAA” batteries, making sure to match their polarities (+/-) to the markings on the inside of the compartment. Replace the cover. •• Batteries in the remote will last for approximately 6 months under the normal use. Replace the batteries if the remote control does not work. Do not mix old with new batteries, or different types of batteries.
Cable Connections Figure. Cable connections Antenna/Power Connection 111 Connect TV RF sources to the antenna port. TV RF signals include: receiving antenna/CATV net. You can use 75 Ohm coaxial cable to connect outdoor antenna. 222 Insert one end of the supplied power cord to the player’s power jack and the other end to the 110-240V AC wall outlet. IMPORTANT NOTICE Wall Outlet 100~240V 111 Be sure to have all necessary connections properly done before connect the power supply.
Cable Connections Coaxial Output - Digital Audio Output Connector When MPEG audio or Dolby Digital audio is played, Dolby Digital bitstream or MPEG audio bitstream is sent to the player’s digital audio output connector. When the player is connected to a Dolby or MPEG audio decorder via this output socket, you can enjoy theater-quality audio in your home. An optical audio cable is required when a Dolby Digital decoder or MPEG audio decoder is used. The mentioned cable is not included with this product.
Cable Connections HDMI Input HDMI (High Definition Multimedia Interface) is a new type of connection that transmits digital audio and video signals simultaneously over a single cable. A HDMI cable is required for the HDMI connection. These HDMI input connectors are capable of receiving video at resolutions up to 1080p (1080-progressive). HDMI Cable External AV Source Component Input (Y Cb/Pb Cr/Pr) The component port is capable of accepting high-definition signals from standard video sources. (e.g.
Cable Connections S-Video Input The S-Video port is capable of accepting signals from standard video sources. (e.g., cable/satellite boxes, DVD players, VCRs, etc.) 111 Connect the S-Video port by the S-Video cable to input the video signal. S-Video cable is not included with this product 222 Connect the L, R port by the white/red plug of the supplied AV cable to input the audio signal. External AV Source RCA Input The CVBS port is capable of accepting signals from standard video sources(e.g.
TV Function Preparations 111 222 333 444 Connect cables.(Refer to the “Cable Connections” section for details). Press the POWER button to turn on the player. Press the MODE button to select the TV signal mode. Press the CH+/- buttons to skip channels. Or you can press the number buttons to input channels directly. For the initial use, you need to scan channels under the Channel Menu. See the "Channel Menu" section for details.
TV Function Audio Menu ITEM DESCRIPTION Sound Mode Set the sound mode. (Standard, Music, Movie, Sports,Personal). Bass Adjust the bass. Treble Adjust the treble. Balance Adjust the sound balance. Surround Set the audio surround effect on/off. AVC Set AVC on/off. MTS Set the MTS audio for the ATV mode. (Mono, Stereo, SAP) Audio Set the audio language. (English, French, Spanish) Language Time Menu ITEM DESCRIPTION Sleep Timer The unit will shut down automatically on the Sleep Time.
TV Function Setup Menu ITEM DESCRIPTION Menu Language Set the menu language. Transparency Set the OSD(On-Screen-Display) transparency on/off. Zoom Set the display aspect ratio. (4:3, Cinema, Normal, 16:9) Noise Reduction Adjust the screen noise appearance. (Weak, Middle, Strong, Off) Advanced This option is available for the VGA mode Closed Caption Press the right direction button to access the Closed Caption menu. CC Mode - Set the CC mode.
TV Function Channel Menu ITEM DESCRIPTION Air/Cable Setup the antenna type as Air or Cable. Auto Scan Search channels automatically. Select this option, press the right button to start searching, press MENU to stop. When use Cable system, you need to select the cable system first from AUTO, STD, IRC and HRC before scaning. Favorite Make the favorite channels collection. Select this option, press the right direction button to access the Favorite List.
AV Function The player’s AV input function would enable user to view programs from external signal sources. When input AV signals, read the user's manual of the external device as well. 111 Connect the external AV signal source. Refer to the “Cable Connection” section for details 222 Press the MODE button to select the relevant AV mode (AV, S-Video, Component, HDMI). System Setup Menu Various features can be preset through the system menu, please read this section carefully.
PC Function You can use the unit’s TFT LCD as your computer’s monitor. 111 Shut down the unit and the computer, connect the VGA jack and PC Audio In jack. See the “Cable Connection” section. 222 Turn on the units and press the MODE button to select VGA System Setup Menu Various features can be preset through the system menu, please read this section carefully. •• Press MENU to display the system menu window..
Trouble Shooting If you have a problem with this device, please read the troubleshooting guide section and check our website at www.cobyusa.com for Frequently Asked Questions (FAQs) and firmware updates. If these resources do not resolve the problem, please contact Technical Support. Symptom Check and Action No Power •• •• •• Make sure the unit has been powered on manually. Check if the power cord has been properly connected to the power outlet. Check if the main power has been switched on.
Specification TFTV 1925/2225 TFT Panel Characteristic Active Area 18.5"/22" Resolution 1366X768 Display Color 6 bit -16.7 M Pixel Pitch 0.3(H) x 0.
