- COBY Electronics LCD Television User Manual
8
Coaxial Output - Digital Audio Output Connector
If you are using the built-in TV tuner, you may want to play the TV audio through your stereo system for
better sound quality. Select TV from the Input source menu to use this connection to watch TV with digital
audio sound. (If this connection is inactive, sound will be output from the built-in speakers of the TV.)
A coaxial digital audio cable is required for this connection. After all necessary connections have been
properly made, turn on both units, select the VGA mode with the SOURCE button. The coaxial cable is not
included with this product.
External Audio and Video Signal Input - HDMI, RCA, S-VIDEO,COMPONENT.
The player's AV function would enable users to view programs from external signal sources.
Four input modes are available for you to chose from, it ranks as below in regard to image denition: HDMI/
COMPONENT/S-VIDEO/RCA
Cable Connections
Amplifier equipped with a
DolbyPro Logic Surround
Coaxial Cable
IMPORTANT NOTICE - When work with external device,
Be sure to have all necessary connections properly done before connect the •
power supply.
Set the unit into the relative input/output mode to enable the signal pass. •
Refer to the manual of external sources as well.•
NOTE:
We supply one set of AV cable and one piece of power cord with this product.
The white/red plug of the AV cable is for the audio L/R connection and the yellow
plug for the video connection. The white/red plug of the AV cable can also be used
separately to input the audio signal in the S-video/Component connection.
The rest of cable needed for other neccessary connections are not included with this
product, please check with electronic store.