DVD-468 2-Channel DVD Microsystem for iPod Instruction Manual
Contents Features ........................................................................................................................................... 2 For Your Attention .........................................................................................................................3-5 Accessories ...................................................................................................................................... 6 Panel .....................................................
Features Thank you for purchasing our product. Please read through this manual before connecting and operating this product. Retain this manual for future reference. The Coby DVD-468 provides a quality video and audio experience.
For Your Attention IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
For Your Attention IMPORTANT INFORMATION To reduce risk of fire or electric shock, do not expose this apparatus to rain or moisture. WARNING The apparatus must not be exposed to dripping or splashing. Objects filled with liquids, such as vases or drinking glasses, must never be placed on the apparatus. This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product.
For Your Attention FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules.
Accessories Accessories Accessories ZOOM STEP A-B USB REPEAT RADIO SUBTITLE MENU TONE A/V Cable Multimedia Player Adapters ENTER AUTO MO/ST CH-LEVEL AM/FM MEMORY AUDIO TITLE SEARCH FM Antenna S.
Panel Front panel Top panel 1 1. DISPLAY SCREEN 2. HEADPHONE JACK 3. OPEN/CLOSE 4. SOURCE 5. STANDBY 6. STOP 7. VOLUME +/- 12 2 8. PLAY / PAUSE 9. PREVIOUS / NEXT 10. AM/FM 11. SD/MS/MMC PORT 12. MULTIMEDIA PLAYER DOCK 13. USB PORT USB SOURCE 1 Cr/Pr 3 L LINE IN S-VIDEO 4 5 6 L R 7 COAXIAL 8 9 4 5 6 1. COMPOSITE VIDEO OUTPUT 2. COMPONENT VIDEO OUTPUT 3. FM ANTENNA JACK 4. AM ANTENNA JACK 5. L/R AUDIO INPUT 6. S-VIDEO OUTPUT 7. L/R AUDIO OUTPUT 8. COAXIAL DIGITAL AUDIO OUTPUT 9.
System Setup MENU OPERATION 1. In DVD mode, press [SETUP] on the remote control to display the setup menu. 2. Press [ ]/[ ] to select an item. The submenu of the selected item will be displayed below instantly. 3. Press [ ]/[ ] to select an item you desire to set in the submenu, then press [ENTER] /[ ]to enter. Use [ ]/[ ] to select an option, then press [ENTER] to confirm it, or press [ ] to cancel. 4. Then you can press [ ]/[ ] to continue to set other items in the submenu. 5.
System Setup 1.3 OSD LANGUAGE (On-Screen Display Language) Set the on-screen display language in this item. 1.4 CLOSED CAPTIONS Set this item to ON. When a disc encoded with closed captions is playing, the closed captions will be shown on the screen. Set this item to OFF to hide it. You can also press [SUBTITLE] on the remote control to show or hide the closed captions. NOTE: This function only works with those discs encoded with closed captions. 1.
System Setup 2.2. DIGITAL AUDIO SETUP 2.2.1 DIGITAL OUTPUT SPDIF OFF: There will be no digital audio signal output. (Coaxial Off) ALL: The digital audio signal output will be in its raw format. Normally, this m ode is used for DTS & Dolby Digital 5.1 signals. PCM ONLY: The digital audio signal output will be in PCM format. Normally, this mode is used for audio CD signals. 2.2.2 LPCM OUT When DIGITAL OUTPUT is set to PCM ONLY, this item is available. Select a sample rating for the analog audio output.
System Setup 3.2 COLOR SETTING 3.2.1 SHARPNESS There are three options (HIGH, MEDIUM and LOW) for you to choose in this item. 3.2.2 BRIGHTNESS, CONTRAST, HUE and SATURATION Enter these items respectively, use direction keys [ 3.2.3 GAMMA ]/[ ] to adjust the value, then press [ENTER] to confirm it. There are four options (HIGH, MEDIUM, LOW and NONE) for you to choose in this item. 3.2.4 LUMA DELAY There are two options (0T and 1T) for you to choose in this item. 3.
System Setup 4.2 PBC (Play Back Control) ON: Activate the PBC function. When playing a disc encoded with PBC function such as VCD 2.0, SVCD etc, press [PBC] to return to the PBC menu. OFF: Disable the PBC function. NOTE: This function only works with those discs encoded with PBC function such as VCD 2.0, SVCD, etc. DVD, VCD1.1, CD-DA and M P3 disc have no PBC menu. 4.3 AUDIO, SUBTITLE and DISC MENU Select a preferred audio language, subtitle language and disc menu language in these items.
Remote Control Remote Control Operation Install two AAA/1.5V batteries into the remote control. Point the remote control at the remote sensor on the front panel. The remote control works within a distance of about 20 feet from the sensor and within an angle of about 30 degrees from the left and right side. Battery Installation Remove the battery compartment cover on the back of the remote control.
Remote control STANDBY 1 15 1 2 3 4 5 6 16 7 2 8 9 0/10 10+ SETUP 17 SLOW 18 3 PBC ANGLE V-MODE PROG OSD SOURCE SELECT 4 5 6 7 22 VOL SEARCH RADIO AM/FM 8 AUTO TITLE MENU AUDIO 26 MO/ST MEMORY S.EFFECT CH-LEVEL TONE 12 USB STEP ZOOM 13 REPEAT A-B 14 25 ENTER 10 11 23 24 SUBTITLE 9 19 20 21 27 28 29 1. STANDBY 2. GOTO 3. SETUP 4. PBC 5. PROGRAM 6. VOLUME+/7. FAST FORWARD/FAST REWIND SEARCH +/8. TITLE/ AM/FM 9. DIRECTION KEYS 10. AUDIO/ MEMORY 11.
Playback STANDBY SOURCE SELECT USB 1 4 7 Switch on the unit. /Put the unit in standby mode. Note: Being in the standby mode uses a minimal amount of electricity, but ensures that the components of the unit operate at maximum efficiency from the moment you start. Press repeatedly to select a signal source among DVD, TUNER, LINE 1 and LINE2. Press this button, use the direction key [ ]/[ ] to select a signal source, DVD, USB or CARD, then press [ENTER] to access the corresponding mode.
Playback Press to temporarily pause a playback. Press it again to resume the playback. Or, press to resume the normal playback from the fast forward, fast reverse playback, etc. Press once to pause the playing disc, then press [ ] to continue the playback; Press this button twice to stop the disc and the disc will be reset to the start point. STEP Press repeatedly to advance the video frame by frame.
Playback S.EFFECT TONE TITLE MENU Press repeatedly to switch the sound effects or switch off the sound effect. Note: You are recommended to switch off the sound effect when playing a Dolby 5.1 channel disc to obtain the real 5.1 effect. Press to select BASS or TREBLE, then use [VOLUME+/-] to adjust the value of bass or treble. When a DVD is currently playing, press to return to the title menu. When a DVD is currently playing, press this button to return to the root menu.
Playback Tuner Operation The following buttons are used in Tuner Mode. Press [SOURCE SELECT] to select Tuner Mode. AM/FM Press to switch between the AM mode and the FM mode. MO/ST Press to switch between Mono and Stereo reception of the broadcast signal in FM mode. MEMORY AUTO After tuning in to a new frequency, press [MEMORY], then select a preferred station by inputting the corresponding numbers to save it as a preset station. Press to search broadcasting stations automatically.
Playback KODAK PICTURE CD PLAYBACK Place a kodak picture CD in the disc tray. The unit will load the disc automatically. Press [ ] to enter the thumbnail mode to preview the pictures. In the thumbnail mode, use the direction keys to select a picture, then press [ENTER] to start the playback from the selected picture. In the thumbnail mode, use the direction keys and [ENTER] to select Slide Show, Menu, Prev or Next at the bottom of the screen. Slide Show: Start slide show playback.
Playback USB DRIVE & SD/MS/MMC CARD PLAYBACK Insert a USB drive in the USB slot. Press [USB], then use the direction key [ ]/[ ] to select MEDIA, then USB. Press [ENTER] to access the connected USB drive. Insert a SD, MMC or MS card in the SD/MMC/MS card slot. Press [USB], then use the direction key [ ]/[ ] to select MEDIA, then CARD. Press [ENTER] to enter the connected memory card. Select DVD and press [ENTER] to return to the DVD mode.
Troubleshooting Before resorting to maintenance service, please kindly check with the following chart. Symptom Cause(s) Remedy The AC power cord is not connected to the power Please check that the AC power cord is connected securely. supply or is not connected to a power supply securely. Picture Connect the video cable securely. The video cable isn't connected securely. There is no picture Press [V-MODE] repeatedly until the Video output mode of the unit isn't correctly set.
Specifications Power supply Power consumption Working environment Disc output Temperature -10~+40 Relative humidity 5%~90% TV System PAL/NTSC Frequency Range S/N(A weight) 20Hz~20KHz 80dB( 1KHz ) Dynamic Range THD+NOISE Tuner AC ~100-240V 50/60Hz 75W WOW FLUTTER AM frequency Range FM band Range Power output (Max) Frequency response 70dB( 1KHz ) -60dB(1KHz) Below the limit of apparatus measure 530KHz~1710KHz 87.5MHz~108MHz 15WX2 1.
