Operation Manual

9
5. ASSEMBLY
For T40B
5.1 Assembly the blade
5.1.1 Insert the left blade and right blade into the both side of the transmission shaft.
(Fig. 2A/ B/2C/2D/2E/2F)
5.1.2 Fix the blade and transmission shaft with the bolt and fixed pin. (Fig. 2G/2H/2I)
Fig.2A Fig.2B Fig.2C
Fig.2D Fig.2E Fig.2F
Fig.2G Fig.2H Fig.2I
5.2 Assemble the depth regulator
5.2.1 Loosen the locking knob and then move the depth regulator from the machine. (Fig.3A)
5.2.2 Insert the depth regulator into the hole of the machine from bottom to top as show. (Fig. 3B/3C)
5.2.3 Tighten the locking knob. (Fig. 3D)
Fig.3A Fig.3B Fig.3C Fig.3D
Left blade
Right blade
Bolt
Fixed pin
Locking knob