Operation Manual

22
fill with the recommended oil to the upper limit mark. Do not overfill. (Fig. 25B)
9.5.5 Reinstall the oil filler cap/dipstick.
Fig. 25A Fig. 25B
9.6 ENGINE OIL RECOMMENDATIONS
For Briggs & Stratton Engines
Oil is a major factor affecting performance and service life. Use 4-stroke automotive detergent oil SAE
10W-30 is recommended for general use.
Outdoor temperatures determine the proper oil viscosity for the engine. Use the chart to select the best
viscosity for the outdoor temperature range expected.
* Below 40°F (4℃) the use of SAE 30 will result in hard starting.
** Above 80°F (27℃) the use of 10W-30 may cause increased oil consumption. Check oil level more
frequently.
9.7 OIL CHANGE
Drain the engine oil when the engine is warm. Warm oil drains quickly and completely.
9.7.1 Place a suitable container below the engine to catch the used oil.
9.7.2 Remove the Oil filler cap/ dipstick the oil into the container by slightly tipping the engine toward the oil
filler cap/dipstick.
9.7.3 With the engine in a level position, fill to the upper limit mark on the dipstick with the recommended oil.
9.7.4 Reinstall the oil filler cap/dipstick securely.
WARNING:
 Running the engine with a low oil level can cause engine damage.
 Engine oil is poisonous, be careful not to touch it.
 With the engine off but still warm, disconnect the spark plug wire and keep it away from the spark plug.
We suggest you take used oil in a sealed container to your local recycling center or service station for
reclamation. Do not throw it in the trash, pour it on the ground, or down a drain.
Oil filler cap/ dipstick
MAX