Operation Manual

15
Fig. 13A Fig. 13B
5.11 Assemble the handle
5.11.1 Fix the handle panel with screws and washers. (Fig. 14A/14B)
5.11.2 Fix the handle into the unit body with screws, nut and bolt. (Fig. 14C/14D/14E/14F)
Fig. 14A Fig. 14B Fig. 14C
Fig.14D Fig.14E Fig.14F
5.12 Adjustment to the handle height
5.12.1 Move the handle up or down, adjustment it to the proper height. There are 3 adjustment heights; at
the 3rd position the handle to the ground is the highest, at 1st position it is the lowest.
5.12.2 Fix the handle with the bolt and locking knob. (Fig. 15A/15B/15C)
5.12.3 Attach the cable-clamp to the position shown and then attach the cable. (Fig. 15D/15E)
Screw M6X14
Bolt M8X95
Nut