Operation Manual

10
5.3 Assemble the front wheel
5.3.1 Insert the drivepipe into the hole of front wheel. (Fig. 3A/3B)
5.3.2 Fixed the front wheel and wheel support with bolt and nut. (Fig. 3C/3D/3E)
Fig. 3A Fig. 3B Fig. 3C
Fig. 3D Fig. 3E
5.4 Assemble the handle support
5.4.1 Fix the handle support into the unit body with bolt and nut supplied as Fig. 5A/5B/5C/5D shown.
5.4.2 Tighten the nut.
Fig.5A Fig.5B Fig.5C Fig.5D
5.5 Assembly the handle
5.5.1 Connect the handle and handle support with the 1 bolt, and 1 nut supplied as Fig. 6A/6B /6C /6D
show.
Bolt M8X.60
Drivepipe Drivepipe
Bolt
M10X75
Nut