Troubleshooting guide

ManualsBrandsCobra ManualsAutomotiveSPYBALL 6829

SPYBALL 6808-9/6828-9 ENGLISH 18

Procedure:

While the security system is disarmed, turn ignition on, press and hold down

push-button n. 1 of the transmitter about 7 seconds, until the LED lights up,

then release. Ä The LED remains on about 3 seconds. Ä During this lapse

of time, press push-button n. 1 again. Ä A short sharp audible signal

confirms the procedure has been entered. The LED switches off shortly, then

it provides five different visual indications that relate to the five selectable

functions. Please refer to the chart below:

TO SELECT TO DESELECT

VISUAL

INDICATION

SELECTABLE

FUNCTION

CONFIRMATION

SIGNAL

CONFIRMATION

SIGNAL

1 flash Biker Recognition Press push-button 1

of the transmitter

after the first flash

Three (3) sharp

audible signals

Press push-button 2

of the transmitter

after the first flash

One (1) sharp

audible signal

follows

2 flashes Arming and

disarming audible

signals + panic

function

Press push-button 1

of the transmitter

after the second

flash

Three (3) sharp

audible signals

Press push-button 2

of the transmitter

after the second

flash

One (1) sharp

audible signal

follows

3 flashes “Turn indicator on”

audible warning

signal

Press push-button 1

of the transmitter

after the third flash

Three (3) sharp

audible signals

Press push-button 2

of the transmitter

after the third flash

One (1) sharp

audible signal

follows

4 flashes Anti-hijack function Press push-button 1

of the transmitter

after the fourth flash

Three (3) sharp

audible signals

Press push-button 2

of the transmitter

after the fourth flash

One (1) sharp

audible signal

follows

5 flashes Polarity of the

instantaneous

alarm trigger input

Press push-button 1

of the transmitter

after the fifth flash

Positive polarity

Press push-button 2

of the transmitter

after the fifth flash

Negative polarity