User`s manual

Adding Printers in NetWare
AXIS 5570e / AXIS 5670e User’s Manual 89
Section 8 Adding Printers in NetWare
This section describes how to continue the installation of the AXIS
5570e/AXIS 5670e in the NetWare environment. Identify which transport
protocol you are running on your network and which installation method
you should use. Continue the installation by selecting the appropriate
installing instructions from the table below:
See “NetWare Administration” on page 114. for information on Novell’s
administration tools.
If you intend to operate your AXIS 5570e/AXIS 5670e in a multi-
protocol, mixed environment, you should also proceed to the other
relevant sections in this manual.
Setup using NDPS
The AXIS 5570e/AXIS 5670e supports Novell Distributed Print Services
(NDPS). You can run NDPS over Pure IP (TCP/IP) or IPX/SPX.
Before the AXIS 5570e/AXIS 5670e can be installed, make sure that
NDPS is installed and a Broker is loaded on your NetWare file server.
Axis Network Print Server uses the AXIS NDPS Gateway for printing in
networks using either IP or IPX as transport protocols. The printer
gateways are included with the NDPS software (from version 5.1 and up)
and are automatically installed together with NDPS.
Installing the Axis
Network Print Server
in the NDPS
environments
Having assigned an IP address to the AXIS 5570e/AXIS 5670e as
described in Setting the IP Address, on page 16, you are now ready to
install the Axis Network Print Server for NDPS printing. You can select to
install the connected printers as public or controlled access printers.
Follow the instructions below to install the Axis Network Print Server
using NDPS:
Installation
method
Transport protocol Action
NDPS
TCP/IP
IPX/SPX
See “Setup using NDPS” on page 89 and
“Public Access Printers” on page 90
“Controlled Access Printers” on page 94
iPrint
iPrint over LPR
See “Setup using iPrint” on page 103 and
“Install a printer using AXIS LPR Gateway Configuration
Snap-in” on page 106
iPrint over IPP
See “Setup using iPrint” on page 103 and
“Install a printer with AXIS IPP Gateway Configuration
Snap-in” on page 105
Queue-based
printing
IPX/SPX
Basic Configuration
To install using the AXIS NetPilot Installation Wizard,
see “Basic Setup with AXIS NetPilot” on page 108
IPX/SPX
Advanced
configuration
If you need a more advanced installation that is not
covered by the AXIS NetPilot Installation Wizard, see
“Advanced Installation using AXIS NetPilot” on page
110