User`s manual

Setting Up - IBM Mainframe (zSeries)
AXIS 5570e / AXIS 5670e User’s Manual 49
Summary of a report generated by Generate Server
Configuration Report (bold text = not default).
Verifying the
Communication:
Follow the steps below to test the communication by sending a print job
to the Axis Network Print Server.
1. Make sure the printer is connected to the Axis Network Print Server and
the corresponding LU in the host is activated.
2. Send a print job from the host.
The Axis Network Print Server is now ready for use. If needed, it can be
further adapted to your system using the Web-based configuration pages
or IBM Printer Emulation. Please refer to Extended IBM Printer
Emulation, on page 179.
LU id Category VTAM LU Name Type Mod Termination
Method
0 Public 14 2 TSELF
4 Public BRLTST04 1 2 TSELF
5 Public BRLTST05 1 2 TSELF
6 Public BRLTST06 1 2 TSELF
7 Public BRLTST07 1 2 TSELF
8 Public BRLTST08 1 2 TSELF
9 Public BRLTST09 1 2 TSELF
10 Public BRLTST0A 1 2 TSELF
11 Public BRLTST0B 1 2 TSELF
PU Profile Names NetWare SAA
Maximum connections per client 5
Use IP client name No
TN3270 NetWare User ID Admin
Client Response Timer 120
Printer End of Job Timer 9999
You can check the status of the TN3270E connection by printing a test page from the Print
Server. This is done by pressing the test button once. Make sure the TN3270E status (St:) line
for your server connection is defined as either:
• SSCP
•LU-1
•LU-3
For additional information about configuring other TN3270E servers, refer to the Technical
Notes on www.axis.com