User`s manual

Setting Up - AS/400 (iSeries)
28 AXIS 5570e / AXIS 5670e User’s Manual
Configuring the
Axis Network Print
Server
To perform the instructions presented in this section, you should first
assign an IP address to your Axis Network Print Server using one of the
methods presented in Setting the IP Address, on page 16.
After you have completed the procedures in the AS/400 Host system
checklist above, follow the instructions below to configure the Axis
Network Print Server for SNA printing in the AS/400 environment using
a Web browser:
1. Start a Web browser, e.g. Internet Explorer or Netscape Navigator.
2. Enter the IP address or the host name of the Axis Network Print Server in
the location field and press the Enter key on your keyboard. The internal Web
pages of the Axis Network Print Server will appear.
Note:
3. Click the Configuration Wizard for IBM sessions button.
4. Click the Add Session button. This will start the Configuration Wizard
which is a step-by-step guide through the required IBM configuration
settings.
Notes for SCS printing:
Note for IPDS printing:
To protect the Admin pages and the Configuration Wizard from unauthorized use, enter a
password (default Pass) in the Root Password field under
Admin | General Settings.
• In the Configuration Wizard’s IBM Printer Emulation window, 38xx is the value used for
LaserWriter printers and all other values are used for matrix printers.
• In the Configuration Wizard Printer Driver window, PCL is used for LaserWriter printers, all
other values apply to matrix printers.
In the Configuration Wizard, you can choose between PCL or PostScript printing. Choose the
printer language that corresponds to your printer.