User`s manual

Setting Up - AS/400 (iSeries)
AXIS 5570e / AXIS 5670e User’s Manual 25
Note:
6. Press Enter to display the
Autocreate controller (AUTOCRTCTL)
parameter. Ensure that the
AUTOCRTCTL parameter is set to *YES. Press F3
to return to the command line.
7. Type
DSPSYSVAL QCHRID on the command line and press Enter. Note the
code page for future reference. Press F3 to exit.
Display Line Description S44A6643
Line description .: LIND ETHLINE
Option . . . . . : OPTION
*
SSAP
Category of line .:
*
ELAN
SSAP List. . . . .: SSAP
----Source Service Access Points------
SSAP Maximum Frame Type
04 1496 *SNA
12 14
9
6 *NONSNA
AA 1496 *NONSNA
C8 1496 *HPR
08 1496 *SNA
Press Enter to continue. Bottom
F3=Exit F11=Nond
i
splay keywords F12=Cancel
The SNA entry is normally set to SSAP 04.
Display Line Description S44A6643
Line description . . : LIND ETHERNET
Option . . . . . . . : OPTION *APPN
Category of line . . : *ELAN
Link speed . . . . .: LINKSPEED 10M
Cost/connect time . .: COSTCNN 0
Cost/byte . . . . . : COSTBYTE 0
Security for line. . : SECURITY *NONSECURE
Propagation delay. . : PRPDLY *MIN
User-defined 1 . . . : USRDFN1 128
User-defined 2 . . . : USRDFN2 128
User-defined 3 . . . : USRDFN3 128
Autocreate controller: AUTOCRTCTL *YES
Autodelete controller: AUTODLTCTL 1440
Press Enter to continue. Bottom
F3=Exit
F11=Nondisplay keywords F12=Cancel