User`s manual

Setting Up - AS/400 (iSeries)
24 AXIS 5570e / AXIS 5670e User’s Manual
3. Press F11 to display keywords.
4. For future reference, note the values of the
Local Adapter Address
(ADPTADR)
and Maximum Controllers (MAXCTL) parameters. Press Enter
to view the active switched controllers display.
5. Press Enter to display the SSAP list. Make sure that there is at least one SSAP
entry dedicated for SNA. For your future reference, note the SSAP value for
this entry.
Verify that the number of controllers displayed on this screen does not
exceed the value for maximum controllers (MAXCTL) from above.
Display Line Description S44A6643
Line description . . .: LIND ETHLINE
Option . . . . . . . .: OPTION *BASIC
Category of line . . .: *ELAN
Resource name . . . .: RSRCNAME LIN061
Online at IPL . . . . : ONLINE *YES
Vary on wait . . . . .: VRYWAIT *NOWAIT
Network controller . .: NETCTL ETHLINET
Local adapter address : ADPTADR 08005AB77D49
Exchange identifier . : EXCHID 056A6643
Ethernet standard . .: ETHSTD *ALL
Line speed . . . . . .: LINESPEED 10M
Enable only for TCP/IP: TCPONLY *NO
Current line speed . .: 10M
Duplex . . . . . . . .: DUPLEX *HALF
Current duplex . . . .: *HALF
Maximum controllers. .: MAXCTL 50
Press Enter to continue.
More...
F3=Exit
F11=NonDisplay keywords
F12=Cancel
Display Line Description S44A6643
Line description . . : LIND ETHERNET
Option . . . . . . . : OPTION
*
ACTSWTCTL
Category of line . . :
*
ELAN
--------------Active Switched Controllers--------
CONTROLER1
CONTROLER2
CONTROLER3
Press Enter to conti
n
ue. Bottom
F3=Exit F11= Nondisplay keywords F12=Cancel