User`s manual

Setting Up - AS/400 (iSeries)
AXIS 5570e / AXIS 5670e User’s Manual 23
Note:
Configuring for SNA printing in 5494 Mode is described in three separate
stages:
• The AS/400 Host System Checklist
• Configuring the Axis Network Print Server
• Verifying the communication
The AS/400 Host
System Checklist
If you are using AS/400 Version 3 Release 1 or higher, the AS/400 host in
5494 CU mode is automatically configured. The instructions in this
section describe this automated configuration procedure.
If you are using a pre-version 3 release, you must perform the
configuration procedure manually. If this is the case, please refer to the
Axis Web site for further documentation.
Note:
1. Type
DSPNETA on the AS/400 command line and press Enter. For future
reference, note the values of the
Local network ID and Default local
location parameters. Press F3.
Example:
The required parameter values are highlighted in bold.
2. Type WRKLIND *ELAN and press Enter:
to get a list of all line descriptions on the system. Type
5 in front of the line
description and press Enter.
SNA is only available for print server models with the SNA option installed. Please refer to
Protocols and Datastreams, on page 9.
You will find an AS/400 Parameter checklist in the AXIS 5570e/AXIS 5670e User’s Guide
where you can enter the values described in this section for future reference.
DSPNETA
Display Network Attributes
System: S1032BB0
Current system name . . . . . . . . . . . . . . : S1032BB0
Pending system name . . . .
.
. . . . . . . . . :
Local network ID . . . . . . . . . . . . . . . . : > APPN
Local control point name . . . . . . . . . . . . : S1032BB0
Default local location . . . . . . . . . . . . . : > S1032BB0
Default mode . . . . . . . . . . . . . . . . . . : BLANK
APPN node type . . . . . . . . . . . . . . . . . : *ENDNODE
Data compression . . . . . . . . . . . . . . . . : *NONE
Intermediate data compression . . . . . . . . . : *NONE
Maximum number of intermediate sessions . . . . : 200
Route addition resistance . . . . . . . . . . . : 128
Server network ID/control point name . . . . . . : *LCLNETID
*ANY
Press Enter to continue.
M
ore...
F3=Exit F12=Cancel