User`s manual

Technical Specification
214 AXIS 5570e / AXIS 5670e User’s Manual
Network Connection All standard Ethernet and Fast Ethernet networks: RJ-45 connector
(Category 5 or 6, shielded twisted pair cable) for 10baseT or 100baseTX
Ethernet with full duplex
Supports: IEEE802.2, IEEE802.3, SNAP and Ethernet II frame types
simultaneously
NWay for autodetection of network speed
Printer Connection Bi-directional support for Apple EtherTalk, Reverse Telnet and PROS
AXIS 5570e Parallel: 36-pin Centronics connector, high-speed IEEE 1284 compliant
with ECP support and throughput of 1 MB/sec
USB: USB 1.1 Low and Full speed. Successfully tested with USB 2.0
Printers
Note: If the AXIS 5570e is powered from the printer via the parallel port
(i.e. instead of via the Power Adapter), the USB port will be switched off.
To make both ports work, use the Power Adapter supplied with the print
server.
AXIS 5670e Parallel: Two 25-pin DSUB parallel ports, high-speed IEEE 1284
compliant with ECP support and throughput of 1 MB/sec
Serial: One 9-pin DSUB connector, RS-232, XON/ XOFF or RTS/CTS, data
rates up to 115,200 baud
Hardware
Processor AXIS Etrax 100LX 32-bit 100 MHz RISC
Memory 2 MB Flash, 8 MB RAM
Front Panel 2 LED indicators: Power and Network
Test button for information printouts
Power Consumption Power provided by external supply. Maximum 5.6W (Type PS-H, 5.1 VDC
2000mA)