User`s manual

DBCS Support
198 AXIS 5570e / AXIS 5670e User’s Manual
1. Start a Web browser, e.g. Internet Explorer or Netscape Navigator.
2. Enter the IP address or the host name of the Axis Network Print Server in
the location field and press the Enter key on your keyboard. The internal Web
pages of the Axis Network Print Server will appear.
Important:
3. Click the Configuration Wizard for IBM sessions button.
4. Click the Add Session button. This will start the Configuration Wizard
which is a step-by-step guide through the required IBM configuration
settings.
Note:
Verifying the Communications Link
Having configured the AS/400 host Axis Network Print Server in
accordance with the above, verify that the communications link is
functioning correctly by following instructions 1-4 detailed in Verifying
the Communication Link, on page 29.
Amending Device Features
After automatic setup, it may be necessary to change the Device features
and Last Code Point of the printer device. Failure to do so may cause
corruption within your print data.
Follow the instructions below, to set the appropriate Device features and
Last Code Point for your chosen printer device:
Country PCL Printer Driver Matrix Printer Driver
Korea (KS)
PCL5
Epson LQ KS
Korea (KSSM) None
Japan None
China Epson LQ 1600K
Taiwan Epson LQ 1600K
To protect the admin pages and the Configuration Wizard from unauthorized use, enter a
password (default Pass) in the Root Password field under Admin | General Settings.
Default fonts will be changed when switching printer emulations.