User`s manual

DBCS Support
AXIS 5570e / AXIS 5670e User’s Manual 197
Section 20 DBCS Support
The Axis Network Print Server supports Double-Byte Character Set
(DBCS) for SNA and TN5250E printing. This facilitates printing from an
IBM AS/400 host system for languages employing double-byte character
sets.
The following Chinese, Japanese and Korean DBCS tables are used in the
Axis Network Print Server:
Axis Network Print Server Double-byte Character Tables
Important! The Axis Network Print Server supports SNA DBCS printing in IBM 5494
emulation only.
Configuring the AS/400 Host, 5494 CU mode
Follow the instructions below to configure the AS/400 Host for DBCS
support:
1. Type WRKSYSVAL on the AS/400 command line and press Enter.
2. Check that the DBCS version installed indicator (QIGC) sysval is set to 1 (on).
3. Check that the QIGCCDEFNT sysval is set to a DBCS font installed in the
system.
4. Proceed with the steps detailed in The AS/400 Host System Checklist, on
page 23.
Configuring the Axis Network Print Server
A number of printer emulations exist for DBCS printing. To set the correct
system language and printer driver, refer to the tables below and enter the
values in the IBM Configuration Wizard.
Printer Emulation and System Language for Country options
Country Printer Emulation Character Table
Korea (KS) 5x27_002_TX_KS KS
Korea (KSSM) 5x27_002_TX_KSSM KSSM
Japan 5x27_001_TX Shift - JIS
China 5x27_005_TX GB
Country Printer Emulation System Language
Korea (KS) 5x27_002_TX_KS 833
Korea (KSSM) 5x27_002_TX_KSSM 833
Japan 5x27_001_TX 290
China 5x27_005_TX 836