User`s manual

IPDS Overview
190 AXIS 5570e / AXIS 5670e User’s Manual
Section 19 IPDS Overview
This section describes:
• IPDS parameter settings
•IPDS fonts
IPDS Parameter Settings
Before printing IPDS data streams, the basic parameters should be set.
This is done from the Axis Network Print Server Web pages under IBM
Emulators | Detailed View (IBM IPDS Emulator Settings) where you can
configure the common parameters of the IPDS emulator and IBM
Emulators | Detailed View (SCS/IPDS Emulator Configurations) where
you can configure the settings for each session.
IPDS System Languages
The Axis Network Print Server must be set up for the System Language of
your IBM system configuration in order to obtain the correct characters in
each specific language. This is done from the IBM Emulators | Detailed
View (SCS/IPDS Emulator Configurations) page.
The default selection is US English (Code Page 37).
The following table describes the valid IPDS system languages:
Code page System language
*37 US English, Portuguese Alternate and Canadian Bilingual
256 International set 1
259 Symbols set 7
260 Canadian French
273 Austrian/German
274 Belgian
275 Brazilian
277 Danish/Norwegian
278 Swedish/Finnish
280 Italian
281 Japanese English
282 Portuguese
284 Spanish and Spanish Speaking
285 UK English
286 Austrian/German Alternate
287 Danish/Norwegian Alternate
288 Swedish/Finnish Alternate