User`s manual

Configuration Possibilities
158 AXIS 5570e / AXIS 5670e User’s Manual
Activate your desired filter by setting the Printer Language Translation
(PRx_FILT.) parameter.
Example: Follow the instructions below to convert ASCII print data to PostScript for
logical printer PR2:
1. From the print server’s internal Web page, select Admin | Logical
Printers.
2. Select the PR2 tab.
3. Set the Printer Language Translation parameter to POSTSCR.
4. Click the OK button.
If you select the parameter value AUTO_PS, the print data for every print
job is searched and if any ASCII data is found, it is translated into
PostScript. This setting is recommended if you are not sure if the print
data is ASCII or PostScript.
PostScript Settings When a logical printer is set for PostScript conversion, you must specify
the following:
•page size
• page orientation
•page format
• which font to use
The default page size is A4 and the default page orientation is Portrait,
while the page format parameters are as follows:
The PostScript font can be any font that is installed in the printer. If no
font is specified, Courier will be used.
Example: Follow the instructions below to set the PostScript parameters for logical
printer PR2:
1. From the print server’s internal Web page, select Admin | Logical
Printers.
2. Select the PR2 tab.
3. Set the Printer Language Translation parameter to POSTSCR.
4. Set the PostScript Page Size parameter to LETTER.
5. Set the PostScript Page Orientation parameter to LANDS.
Page Format Parameter Default Value Comment
Lines per page (MPL) 66
Characters per line (MPP) 00 = disable line wrap
Characters per inch (CPI) 100 100 = 10 char per inch
Lines per inch (LPI) 60 60 = 6 lines per inch
Left margin (LM) 30 30 = 3.0 mm
Top margin (TM) 50 50 = 5.0 mm