User`s manual

Management and Configuration
AXIS 5570e / AXIS 5670e User’s Manual 139
Printing Hexdumps The Axis Network Print Server allows you to record a trace of the
communication between the Axis Network Print Server and the host.
The Axis Network Print Server supports hexdump printing for the SNA,
TN3270E, TN5250E, LPR/LPD and Raw TCP/IP printing protocols. Please
refer to “Protocols and Datastreams” on page 9 for details on the
supported protocols.
Follow the instructions below to perform a hexdump printout for the SNA
printing protocol:
1. Log in to the Axis Network Print Server by typing:
telnet <host name> or telnet <IP address> in a DOS windows
(Windows and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
root and pass.)
3. Enable the Axis Network Print Server to hexdump mode by typing:
snahexdump
4. Select Start Logging from the Terminal menu in the Telnet window. Specify
a file name and select the folder where you want to save the file.
5. Start the print job.
6. When the print job is finished, select Stop Logging from the Terminal menu.
7. Enter the quit command
Replace the command in step 3 above with
tnehexdump for the TN3270E
and TN5250E protocols,
lpdhexdump for the LPR/LPD protocol, or
rtnhexdump for the reverse Telnet protocol.
Telnet Help By typing
help in step 3 in any of the Telnet instruction sets above, a list
of all available commands will be displayed.