User`s manual

Management and Configuration
138 AXIS 5570e / AXIS 5670e User’s Manual
Example:
Typical Telnet session to view the Account File
Viewing
the Status file
The status command shows which printer port the logical printers are
assigned to, and their current status.
Follow the instructions below to view the status file using telnet:
1. Log in to the Axis Network Print Server by typing:
telnet <host name> or telnet <IP address> in a DOS window
(Windows and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
root and pass.)
3. View the status file by typing:
status
Performing Resets Three types of reset commands allow you to perform soft resets, to
perform hard resets, and to reset the print server’s parameters to its
default settings.
Follow the instructions below to perform a soft reset using telnet:
1. Log in to the Axis Network Print Server by typing:
telnet <host name> or telnet <IP address> in a DOS window
(Windows and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
root and pass.)
3. Restart the print server’s protocols by typing:
softreset
Replace the command in step 3 above with hardreset or default to
perform the other two reset operations.
> telnet npserver
Trying 192.36.253.96...
Connected to npserver.
Escape character is ‘^]’.
AXIS 5670e TELNET Network Print Server V7.00 Oct 04 2004
AXIS 5670e network login: root
Password: pass
(not visible)
AXIS 5670e TELNET Network Print Server V7.00 Oct 04 2004
Root> account
Current account file:
JOB USER PROT PORT S BYTES ETIME
2 LSLM_user LAN Server/Man. PR1 C 188313 1
1 Administrator LPD pr1 C 244513 1
Root>