Owner's Manual

PART III:Assemble the Stump Grinder
1. Fitting the wheels and drum brake
Fit the drum brake and wheel assemblies as shown ab ove.
1. Fit the drum brake assembly to the left side axle.
2. Install the brake cable as shown opposite.
Adjust the tension on the cable ensure the brake
operates correctly.
3. Fit the wheel with the drum housing to the left side.
4. Fit the other wheel to the right axle as shown.
5. Secure with the flat washer, spring washer and the nut
on each side.
2. Installation of the lower handrail
Fit the lower handle section with the flat washer,
spring washer and nut as shown opposite.