Owner's Manual

6.Cutting the Full Stump
1. Make sure the throttle is set to FAST.
The cutter wheel will accelerate to cutting
speed.
2. Direct the cutting wheel against the
stump, beginning with the nearest top
corner of the stump.
3. Steadily sweep it across the stump left
and right, cutting away 1/2 inch of wood
with each sweep.
4. Raise and lower the cutting wheel
between sweeps by lowering and raising
the control handle.
5. Roll the machine forward and back by pushing and pulling on the control handle. Re-lock it when
the machine has been repositioned and continue cutting.
7.Continue with Final Root Removal
Cut the remaining roots until all roots are removed.