Owner's Manual

5. Fitting the rear rubber guard
Fit the rear rubber guard as shown
opposite, using the washer, spring
washer and nut as shown opposite.
6. Apply lubricating grease to the bearings
Lubricate the main bearings as indicated opposite before
each use.
This is essential regular maintenance.
NOTICE
7. Add engine oil and petrol before starting
The stump grinder is shipped without engine oil in the engine, add oil as explained in the engine
manual.
Always check the engine oil before operating the stump grinder.
Fill the engine fuel tank with fresh petrol. Never use stale or old fuel as this will cause
carburetor issues, such as difficulties starting and correct engine performance.