Operation Manual

e). Fix the cord with the cord clips (16) to the handle bar

(Fig. 5).

Fig. 5

Fig. 6

2). GRASS CATCHER ASSEMBLY

WARNING! Do not attempt to use the product

without the grass catcher attached as objects may be

thrown.

WARNING! The product must be switched off and the

cutting device must have stopped rotating before

you attach or empty the grass catcher!

WARNING! Never use the scarifier without the

grass catcher bag securely fitted.

NOTE: A full grass catcher will reduce the performance of

this product. The grass catcher should be emptied when it is

half full.

Always attach the grass catcher (15) to the product

before operation.

a). Open the deflector guard (14), hold it in position and

align the hooks on the grass catcher (15) with the hinges on

the back of machine. (See Fig. 6).

b). Empty the grass catcher (15) frequently during use. Do not

wait until it is completely full. We recommend emptying it

when it is half full.

c). Lift the deflec

tor guard (14) and pull the grass catcher (15)

off the hinges to remove it.

d). Empty the collected material onto a compost heap and

reattach it onto the product.

Fig. 7

3. CABLE ROUTING

1). Always route the electric mains cable away from the work

area to prevent it from coming into contact with the cutting

device. Plan your route before starting work. Start your work at

the nearest point to the electrical outlet, and work away from it.

This will keep the cable away from the cutting device and avoid

it being accidentally cut. Keep the cable over your shoulder for

added safety.

2). For cord strain relief of the cable, form a loop at the end of

the main cable and bring this through the opening in the handle

and insert it into the cord strain relief.

26/02/2013 v1