Operation Manual

b). Align the middle handle bars (5) to the lower ones (6).
Make sure the holes in the handle bars (5, 6) correspond
and secure them with one mounting set (4) on each side.
(See Fig. 2).
Fig. 2
c). Slide the cord strain relief (2) onto the upper handle bar (3).
(See Fig. 3).
Fig. 3
d). Alig
n the upper handle bar (3) with the middle handle bar
(5) and secure them with one mounting set (4) on each side.
(See F
ig. 4a, 4b).
Fig. 4a
Fig. 4b
26/02/2013 v1
13
6
5
4b
4a
2
3
3
5
6
3
4b
4a