Operation Manual

- 2 -
WARNING
For your own safety please read this manual before attempting to operate your new unit. Failure to follow
instructions can result in serious personal injury. Spend a few moments to familiarize yourself with your
mower before each use. Keep this manual in a safe place, so that the information is available at all times. If
you give the equipment to any other person, hand over these operating instructions and safety regulations
as well.
Intended use
The equipment may only be used for the tasks it is designed to handle. Any other use is deemed
to be a case of misuse. The user/operator and not the manufacturer will be liable for any damage
or injuries of any kind caused as a result of this.
The petrol lawn mower is intended for private use i.e. for use in home and gardening
environments. Private use of the lawn mower refers an annual operating time generally not
exceeding that of 50 hours, during which time the machine is primarily used to maintain
small-scale, residential lawns and home/hobby gardens. Public facilities, sporting halls, and
agricultural/forestry applications are excluded.
Please note that our equipment has not been designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the machine is used in commercial, trade or industrial
or for equivalent purposes. The operating instructions as supplied by the manufacturer must be
kept and referred to in order to ensure that the lawn mower is properly used and maintained. The
instructions contain valuable information on operating, maintenance and servicing conditions.
Important! Due to the high risk of bodily injury to the user, the lawn mower may not be used to
trim bushes, hedges or shrubs, to cut scaling vegetation, planted roofs, or balcony-grown grass,
to clean (suck up) dirt and debris off walkways, or to chop up tree or hedge clippings. Moreover,
the lawn mower may not be used as a power cultivator to level out high areas such as molehills.
For safety reasons, the lawn mower may not be used as a drive unit for other work tools or
toolkits of any kind.