Operation Manual

- 10 -
6. “3 in 1” Collection, Mulch and Side Discharge
The MX515SPBI lawn mower offers the facility to collect grass, mulch or provide side grass side discharge:
Grass mulching tips:
The method of mulching grass clippings involves cutting the clipped grass more than once into smaller pieces of grass. The
finely chopped grass makes an ideal fertilizer for the lawn.
Hints for mulch-mowing:
- Regularly cut-back by a maximum of 2cm from 6cm to 4cm grass length.
- Ensure the blade is sharp for best results.
- Do not mow wet grass
- Set the engine speed its highest setting
- Mow at a walking pace
- Regularly clean mulching wedge, housing inner side and mowing blade
Starting Operation
ONE: Retrofitting for mulching mower
WARNING: Stop the engine and ensure the blade is stopped before proceeding.
1. Lift the rear cover and remove the grass bag. (Fig 7A)
2. Push the mulching wedge into the deck. Lock the mulching wedge with the button into the opening on the deck. (Fig 7B)
3. Lower the rear cover again.
Fig 7A Fig 7B
TWO: Resetting for side-discharge mowing
Stop the engine and ensure the blade is stopped first!
Fig 8A Fig 8B Fig 8C
1. Lift the rear cover and remove the grass bag.
2. Mount the mulching wedge.
3. Lift the sideward flap for side discharge (Fig 8A)
4. Mount the discharge guide for side discharge on the support pin of the sideward flap. (Fig 8A, Fig.8B)
5. Lower the sideward flap- the flap lies on the discharge channel. (Fig 8C)