Operation Manual

- 15 -
screw (3) must be torque to 25NM.
WARNING: For service, replace the blade with Cobra blade: Cobra Part no. 263001504
Fig.10
Warning: Disconnect the electric cord from the power supply.
WARNING: Protect hands by using heavy gloves or a rag to grasp the cutting blades when replace the
blade.
12. EXTENSION CORDS
You should only use extension cords for outdoor use, PVC ordinary duty with a cross sectional area not less
than 1.0mm² (not light than H05VV-F 2x1.0mm
2
).
Before using, check the supply and extension cords for signs of damaged during use, disconnect the cord for
signs of damage or aging. If the cord becomes damaged during use, disconnect the cord from the supply
immediately. DO NOT TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY. Do not use the
appliance if the cord is damaged or worn. Keep extension cords away from cutting elements.
Warning: Always ensure that the ventilation openings are kept clear of debris.
13. MAINTENANCE AND CARE
Warning: Before performing any Maintenance or cleaning work, Always pull out the mains
plug!
Do not spray the unit with water. Ingress of water may destroy the Switch-plug combination unit and the
electric motor. Clean the unit with a cloth, hand brush, etc.
Expert inspection is required, do not make any adjustment by yourself. Contact your local Service
centre:
a) if the lawn mower strikes an object.
b) if the motor stops suddenly
c) if the blade is bent (do not align!)
d) if the motor shaft is bent (do not align!)
e) if a short-circuit occurs when the cable is connected.
f) If the gears are damaged.
g) If the V-belt is defective.
h) Use only manufacturer’s recommended replacement parts and accessories.