Operation Manual

- 9 -
To change the height of cut, squeeze the adjuster lever toward the wheel, moving it up or down to the selected height. (Fig.5 and
see clause 7.9)
Fig. 5
6. “3 IN 1”
The lawn mower has 3 in 1 features:
1. Rear grass collection.
2. Grass mulching.
3. Side-discharge.
What is mulching?
When mulching, the grass is cut in one working stage, then finely chopped and returned to the grass strip as natural fertiliser.
Recommendations for mulch-mowing:
- Cut your lawn regularly. Cut-back by a maximum of 2cm from grass of 6cm height.
- Ensure the blade is sharp for best results - Do not mulch wet grass.
- Set maximum engine speed.
- Only move at a walking pace.
- Regularly clean mulching wedge, housing inner side and mowing blade.
Starting Operation
ONE: Retrofitting for mulching mower
WARNING: Only attempt to fit the mulching wedge when the engine and the blades are completely stopped.
1. Raise the rear cover and remove the grass catcher.
2. Push the mulching wedge into the deck. Lock the mulching wedge with the button into the opening on the deck. (Fig 6A/Fig 6B)
3. Lower the rear cover again. (Fig.6C)
4. Lift the sideward flap and remove the side discharge channel.
Fig .6A Fig. 6B Fig .6C