Operation Manual

- 10 -
TWO: Resetting for side-discharge mowing
Only attempt this when the engine and blades are completely stopped.
1. Lift the rear cover and remove the grass catcher.
2. Mount the mulching wedge.
3. Lift the sideward flap for side discharge. (Fig.7A)
4. Mount the side discharge channel for side discharge on the support pin of the sideward flap. (Fig.7B/Fig.7C)
5. Lower the sideward flap- the flap lies on the side discharge channel. (Fig 7D)
Fig. 7A Fig. 7B
Fig. 7C Fig. 7D
THREE: Mowing with the grass catcher
WARNING: Only attempt when the engine is completely stopped and the blades are at complete standstill.
For mowing with the grass catcher
Remove the mulching wedge and discharge channel for side discharge and mount the grass catcher.
1. Removing the mulching wedge:
-Lift rear cover and remove the mulching wedge.
2. Removing the side discharge channel for side discharge:
-Lift sideward flap and remove the side discharge channel.
-The sideward flap automatically closes the discharge opening on the housing by means of spring force.
-Regularly clean the sideward flap and discharge opening of grass and dirt residue.
3. Mount the grass catcher:
-To fit: Raise the rear cover and hitch the grass catcher on rear of mower.
-To remove: grasp and lift the rear cover, remove grass catcher.
7. OPERATING INSTRUCTIONS
7.1 BEFORE STARTING
Service the engine with petrol and oil as instructed in the separate engine manual packed with your mower. Read the instructions
carefully.
WARNING! Petrol is highly flammable.