Operation Manual

- 8 -
Fig.2G Fig.2H
5.2 ADJUSTMENT FOR AN APPROPRIATE ANGLE
A).Pull the locking lever opening;
B).Rotating the upper handle centered of the angle adjusting gear for adjusted a appropriate angle into the scope -20º to 20º (5
position: -20º/-10º/0º/10º/20º) as the Fig.3 shown;
C).Push the locking lever closed to connect the lower handle and the upper handle.
Fig.3
5.3 MOUNTING AND DISMOUNTING THE GRASS CATCHER
1. To fit: Raise the rear cover and hitch the grass catcher on rear of mower.
2. To remove: grasp and lift rear cover, remove grass catcher.
Fig.4A Fig.4B Fig.4C
5.4 STARTER HANDLE
Move the starter handle from the engine to the rope guide.
Fig.5A Fig.5B