Operation Manual

- 10 -
Fig.7A Fig.7B Fig.7C
TWO: Resetting for side-discharge mowing
Only change when motor and cutting are at standstill!
1. Lift the rear cover and remove the grass catcher.
2. Mount the mulching wedge.
3. Lift sideward flap for side discharge. (Fig.8A)
4. Mount the discharge guide for side discharge on the support pin of the sideward flap. (Fig.8B/Fig.8C)
5. Lower the sideward flap- the flap lies on the discharge channel. (Fig.8D)
Fig. 8A Fig. 8B Fig. 8C
Fig .8D
THREE: Mowing with the grass catcher
WARNING: only change with a stopped engine and standstill cutter.
For mowing with the grass catcher, remove the mulching wedge and discharge channel for side discharge and mount the grass
catcher.
1. Removing the mulching wedge:
-Lift rear cover and remove the mulching wedge.
2. Removing the side discharge channel for side discharge:
-Lift sideward flap and remove the side discharge channel.
-The sideward flap automatically closes the discharge opening on the housing by mean of spring force.