Operation Manual

Cutter attachment weight……..….1.8kg

Blade length

Long Model………..........…560mm/22in

Short Model……….........…460mm/22in

Cutter drive…….................…Spur gear

Gear lubricant……Lithium based grease

Tool kit contents………….. Combination

Wrench with 13mm+19mm

Sockets/flat blade screwdriver 4mm-hex

Wrench,and 8mm+10mm spanner

If the lower tube assembly is long enough,you can use it only without upper tube

according to the working condition.

Operate as follows:

1.Follow “disassemblying the pole sections” section to remove the upper tube/coupler

assembly from gearcase.

2.Follow”assembling the pole sections” section to assemble the gearcase onto the

lower tube assembly.See figure 15.