Operation Manual

VHF Marine Radio Protocols
26
Deutsch
Erweiterter Betrieb
Bedienung
1. Press the MEM/ESC button. The MEM icon will be
turned On.
2. Press the Channel Up/Down button to select the
memory location. If a memory location has been
programmed, its associated channel will display
on the LCD. Your radio is now in Marine Standby
mode on the selected memory location.
To Exit Memory Location Mode:
Press the MEM/ESC button to return the radio to
Marine Standby mode. The last channel used in
Marine Standby mode will now be displayed on
the LCD and the MEM icon will disappear.
To Erase Stored Memory Locations:
1. Press and hold the MEM/ESC button for two (2)
seconds. The memory location number will start
ashing and the MEM icon will be turned On.
2. Use the Channel Up/Down button to advance to
the memory location you want to erase.
3. Press the MEM/ESC button to select the memory
location. The memory channel number will
stop ashing and the channel number will start
ashing.
4. Use the Channel Up/Down button to change to
the channel to read “00” at the selected memory
location.
5. Press the MEM/ESC button to erase that channel.
Repeat steps 2 through 5 to erase as many additional
memories as you want.
6. Press and hold the MEM/ESC button for two (2)
seconds. This will return the radio to Memory
mode.
7. Press and release the MEM/ESC button again to
return to Marine Standby mode.
MEM Icon