Specifications

List Price Book 20A • Effective March 1, 2009
Phone: [phone] • Fax Customer Support: 860-584-2136 • Fax Order Entry: 866-322-1233
66
Pricing/product description subject to change without notice
Power Supplies and Accessories
Power Supplies
515 Power Supplies
Standard Features
• Filtered and regulated
• Battery charging circuit
• NEMA 1 enclosure - 12" H x 12" W x 4" D
• Hinged cover and lock down screws
NOTE: Optional modules are factory installed.
1. Select Power Supply
515-12 Base Power Supply (10A @ 12 VDC voltage specific) (approx. weight: 11 lbs) $784.00
515-24 Base Power Supply (5A @ 24 VDC voltage specific) (approx. weight: 11 lbs) $784.00
2. Select Modular Options
RCM Relay Control Module (Independent control of 2 DPDT relays) $140.00
DCM Dual Control Module (Independent control of 1 or 2 Independent stations) $140.00
CMR Control Module Rack (Required for 2 or 3 DCM or RCM cards) $140.00
TDM Time Delay Module (TDM can ONLY be used with DCM or RCM) $109.00
(Adjustable relock time 0-30 sec, optional for each independent station)
MR Manual Reset (for Canada) includes EIR option $76.00
EIR Emergency Interface Relay $48.00
KLC Key Lock Cover (factory installed only) $32.00
3. Select Standby Power Accessories
SBP2 Standby Battery Pack 12/24 VDC - two 4A/hr (approx. weight 8 lbs) batteries with cables $141.00
SBE Standby Battery Enclosure - required for more than 4 batteries $141.00
SBE-KLC Standby Battery Enclosure with key lock cover $172.00
515 Series
MEA
NOTE: Power supplies require connection to AC line voltage.
Installation and all electrical connections (high and low voltage)
should be performed by a qualified electrical contractor.
Standby Battery Pack
(SBP2)
Standby Battery Enclosure
(SBE)
• Plug- in Dual Control Modules (DCM)
• Time Delay Module (TDM)
• Emergency Interface Relay (EIR)
How to Select Options for 515 Power Supplies
1. Each Dual Control Module (DCM) provides control of two individual zones. Each zone has a 5A DPDT
control relay.
2. A single DCM card can plug directly to the main board, or a Control Module Rack (CMR) can plug to the
main board and accept up to three DCM cards. This upgrade is ideal for interlock applications.
3. A plug-in Time Delay Module (TDM) that provides an adjustable (0-30 seconds) delay on relock can be
added to each individual zone of the DCM card.
4. The Emergency Interface Relay (EIR) module is a plug-in relay to provide an interface with fire or other
emergency override systems.
515 SERIES OPTIONS: Each 515 board accepts two DCMs directly mounted to the box, or up to two CMRs (which hold up to 6 each
DCMs) or one DCM and one CMR boards.
DCM AVAILABLE ZONES CMR (Required as Shown) TDM EIR
0 - BASIC N/A 0 0 0 or 1
1 2 0 or 1 (expansion) Up to 2 0 or 1
2 4 0 or 1 (expansion) Up to 4 0 or 1
3 6 1 Up to 6 0 or 1
4 8 1 or 2 Up to 8 0 or 1
5 10 2 Up to 10 0 or 1
6 12 2 Up to 12 0 or 1