Operation Manual

- 11 -
TWO: Resetting for side-discharge mowing
1. Lift the rear cover and remove the grass catcher.
2. Mount the discharge channel.
3. Lift the sideward flap for side discharge (Fig.7D)
4. Mount the discharge guide for side discharge on the support pin of the sideward flap. (Fig.7E/Fig.7F)
5. Lower the sideward flap- the flap lies on the discharge channel. (Fig.7G)
WARNING: Only when the engine and the blade are at standstill!
Fig. 7D Fig. 7E
Fig. 7F Fig. 7G
THREE: Mowing with the grass catcher
For mowing with the grass catcher, remove the mulching wedge and side discharge channel from the side discharge chute and
mount the grass catcher.
1. Removing the mulching wedge:
-Lift rear cover and remove the mulching wedge.
2. Removing the side discharge channel for side discharge:
-Lift sideward flap and remove side discharge channel.
-The sideward flap automatically closes the discharge opening on the housing by means of spring force.
-Regularly clean the sideward flap and discharge opening form grass and stuck on dirt.
3. Mount the grass catch bag:
-To fit: Raise the rear cover and hitch the grass catcher on rear of the mower.
-To remove: Grasp and lift the rear cover, remove the grass catcher.
WARNING: only with a stopped engine and standstill cutter blade.