Operation Manual

- 10 -
5.6 Tool Box
For the MX51SPH
This MX51SPH lawn mower has a tool box. Push the button to open it, and then press the cover to lock it. You can put tools such
as spanners and screwdrivers in this box.
Fig.6
Starting Operation
6. “3 IN 1”
The lawn mower has 3 in 1 features:
1. Rear grass collection.
2. Grass mulching.
3. Side-discharge.
What is mulching?
Mulching lawn mowers recycle grass clippings by finely cutting and re-cutting the
grass concealing cuttings within the standing grass to wilt and decompose thereby
feeding the soil.
Recommendations for mulch-mowing:
- Cut your lawn regularly. Ideally, for example, where the grass height is 6cm only cut 2cm off
- Ensure the blade is sharp for best results - Do not mulch wet grass.
- Set maximum engine speed.
- Only move at a walking pace.
- Regularly clean mulching wedge, housing inner side and mowing blade
ONE: Retrofitting for mulching
WARNING: only with a stopped engine and stationary cutting blade.
1. Raise the rear cover and remove the grass catcher. (Fig 7A)
2. Push the mulching wedge into the deck. Lock the mulching wedge with the button into the opening on the deck. (Fig 7B)
3. Lower the rear cover again.
Fig.7A Fig.7B Fig.7C