Operation Manual

- 7 -
5. ASSEMBLY
5.1 FOLDING HANDLES
1. Fix the lower handlebars into the mower body with a suitable spanner. (Fig.1J/Fig.1K/Fig.1L)
2. Lift the two locking levers to release the upper handlebars for folding. (Fig. 1M)
3. Push the locking lever closed to lock the handlebars in the operating position. (Fig.1N)
4. Adjust the tension by turning the lock nut with a suitable spanner. (Fig.1O)
5. Attach the cable-clamp to the position shown and then attach the cable. (Fig.1P)
Fig.1J Fig.1K Fig.1L Fig.1M
Fig.1N Fig.1O Fig.1P
5.3 MOUNTING AND DISMOUNTING THE GRASS CATCHER
1. To fit: Raise the rear cover and hitch the grass catcher on the rear of the mower. (Fig. 3A) (Fig.3B)
2. To remove: grasp and lift the rear cover and remove grass catcher.
Fig.3G Fig.3H
5.4 STARTER HANDLE
Move the starter handle from the engine to the rope guide.
Fig. 4A
5.5 HEIGHT OF CUT