Operation Manual

- 11 -
Fig.12B
1. Stop the mower and disconnect spark plug cable before changing the mower cutting height.
2. The central height adjustment lever offers you 10 different height positions.
3. To change the height of cut, squeeze the adjuster lever towards the wheel, moving up or down to the selected height.
(Fig.12B)
All wheels will be in the same height of cut.
7. MAINTENANCE INSTRUCTIONS
SPARK PLUG
Use only original replacement spark plug. For best results, replace the spark plug every 100 hours of use.
8. LUBRICATION INSTRUCIONS
CAUTION: DISCONNECT THE SPARK PLUG BEFORE SERVICING.
1. WHEELS-Lubricate the ball bearings in each wheel at least once a season with a light oil.
2. ENGINE-Follow the engine manual for lubrication instructions.
9. CLEANING
CAUTION: Do not hose the engine. Water can damage the engine or contaminate the fuel system.
1. Wipe the deck with a dry cloth.
2. Hose under the deck by tilting the mower so that the spark plug is up.
9.1 ENGINE AIR FILTER CLEANER
CAUTION: Do not allow dirt or dust to clog the air filter foam element. The engine air cleaner element must be serviced
(cleaned) after 25 hours normal mowing. The foam element must be serviced regularly if the mower is used in dry dusty
conditions.
To CLEAN THE AIR FILTER
1. Press down the two tabs on top of the filter cover.
2. Remove the cover.
3. Wash the filter element in soap water. DO NOT USE PETROL!
4. Air dry the filter element.
5. Place a few drops of SAE30 oil on the foam filter and squeeze tightly to remove any excess oil.
6. Reinstall filter.
NOTE: Replace filter if frayed, torn, damaged or unable to be cleaned.