Operation Manual

- 11 -
6.9 HEIGHT ADJUSTMENT INSTRUCTIONS
CAUTION: Do not at any time make any adjustment to lawnmower without first stopping the
engine and disconnecting the spark plug wire.
CAUTION: Before changing mowing height, stop the mower and disconnect the spark plug cable.
Your mower is equipped with a central height adjustment lever offering 10 height positions. (Fig.10C)
The height (the blade to the ground) can be adjusted from 25 mm to 75 mm (10 height positions).
1. Stop mower and disconnect spark plug cable before changing mower cutting height.
2. The central height adjustment lever offers you 10 different height positions.
3. To change the height of cut, squeeze adjuster lever toward the wheel, moving up or down to selected height.
Fig.10C
7. MAINTENANCE INSTRUCTIONS
SPARK PLUG
Use only original replacement spark plug. For best results, replace the spark plug every 100 hours of use.
8. LUBRICATION INSTRUCTIONS
CAUTION: Disconnect the Spark Plug before servicing.
1. WHEELS-Lubricate the ball bearings in each wheel at least once a season with a light oil.
2. ENGINE-Follow engine manual for lubrication instructions.
9. CLEANING
CAUTION: Do not hose engine. Water can damage engine or contaminate the fuel system.
1. Wipe deck with dry cloth.
2. Hose under deck by tilting the mower so that the spark plug is up.
9.1 ENGINE AIR CLEANER
CAUTION: Do not allow dirt or dust to clog the air filter foam element.
The engine air cleaner element must be serviced (cleaned) after 25 hours of normal mowing. The foam
element must be serviced regularly if the mower is used in dry dusty conditions.
To CLEAN AIR FILTER
1. Remove screw.
2. Press down the two tabs on top of the filter cover. Remove cover.
3. Wash filter element in soap water. DO NOT USE PETROL!
4. Air dry filter element.
5. Place a few drops of SAE30 oil on the foam filter and squeeze tightly to remove any excess oil.