Specifications

11
OPERATION (Cont.)
5. After cutting the sides proceed to the top.
6. When cutting wide hedges with the cutting area in
sight move the cutting blade lightly through the
cutting surface in a sweeping motion following the
shape of the hedge or shrub. A slight tilt downwards
of the cutting blade in the direction of motion is
recommended for optimum cutting performance.
7. Move the trimmer with slow motion forward when
cutting higher hedge and the cutting area out of sight
8. Do not rush and do not attempt to cut too much with
one stroke of the cutting blade.
9. Cut in a number of stages if the area being cut is
particularly long to achieve a better result; smaller
cuttings will allow for easy composting.
NOTE: When shaping it is advisable to achieve a
trapezoidal shape. A trapezoidal cut corresponds to the
natural growth of plants and results in optimal hedge
growth, as it will expose more light to the lower end of
the hedge.
Tips for Using this Pole Hedge Trimmer
Length adjustment
1. Loosen the lower locking sleeve (7).
2. Push the pole (9) and pole extension (6) towards
each other to retract or pull away from each other to
extend (Fig. 8).
WARNING! The length of the extension pole is limited! Stop pushing/pulling as
soon as you feel a resistance!
Extend the extension only to the length required to reach the hedges being trimmed!
Do not attempt to use the product at a length which does not allow you to achieve
proper footing and balance at all times!